Circuit/System Verification
WARNING: This page is about a different car, the 2020 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition - On / Vehicle - In Service Mode
- Verify the scan tool parameter:Right Rear Door Exterior Lock/Unlock Switch Status=Inactive
- If not the specified state
Refer to: Circuit/System Testing
- Go to next step: If the specified state
- If not the specified state
- Operate the component:A24RR Rear Side Door Outside Handle - Right - Pressed
Verify the scan tool parameter:Right Rear Door Exterior Lock/Unlock Switch Status=Active
- If not the specified state
Refer to: Circuit/System Testing
- Go to next step: If the specified state
- If not the specified state
- A fault is not currently present and may be an intermittent condition