Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2021 >> Traverse L >> Repair and Diagnosis >> External Pages >> Different car >> Section 63 (Lighting System - Repair Instructions) >> Repair Instructions >> Hazard Warning Switch Replacement (9 Button) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2020 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM5422024Courtesy of GENERAL MOTORS COMPANY

    With a flat bladed plastic trim tool, start at the top to release the clip.

  2. Instrument Panel Radio Front Trim Plate (1) - Remove
  3. GM5422026Courtesy of GENERAL MOTORS COMPANY

    With a flat bladed plastic trim tool, start at the top to release the clip.

  4. Instrument Panel Radio Front Trim Plate (1) - Remove
  5. GM5422046Courtesy of GENERAL MOTORS COMPANY

    Radio Control Bolt (1) - Remove [2x]

  6. Disconnect the electrical connectors.
  7. Radio Control (2) - Remove
  8. GM5422150Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Center Air Outlet Bolt (1) - Remove [3x]

  9. Instrument Panel Trim Plate (2) - Remove
  10. GM5482913Courtesy of GENERAL MOTORS COMPANY

    Heater and Air Conditioning Control Bolt (1) - Remove [2x]

  11. Heater and Air Conditioning User Interface Control (2) - Remove
  12. Disconnect the electrical connector.
  13. GM5441314Courtesy of GENERAL MOTORS COMPANY

    Hazard Warning Switch Bolt (1) - Remove [2x]

  14. Pull the hazard warning switch (2) straight back to release.
  15. Hazard Warning Switch (2) - Remove
  16. Disconnect the electrical connector.
scientia non olet · About Mike's Workshop Manuals