Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2021 >> Traverse L >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (Antilock Brake System) >> Diagnostic Information and Procedures >> DTC C2A23 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2020 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition - On / Vehicle - In Service Mode
  2. Verify no other DTCs are set.
    • Go to next step: If no other DTCs are set 
  3. Ignition/Vehicle - Off
  4. Verify the following conditions do not exist:The control module's circuit terminals and connectors=Incorrect
    • If a condition exists - Repair or replace as necessary
    • Go to next step: If no condition exists
  5. Verify DTC C2A23 is not set.
    • If the DTC is set 

      Replace the component:K160 Brake System Control Module

    • Go to next step: If the DTC is not set 
  6. All OK.
scientia non olet · About Mike's Workshop Manuals