Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2021 >> Traverse L >> Repair and Diagnosis >> External Pages >> Different car >> Section 44 (Supplemental Restraints System) >> Diagnostic Information and Procedures >> DTC B1A34 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2020 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

Refer to:SIR Service Precautions 

  1. Ignition - On / Vehicle - In Service Mode
  2. Refer to:Repairs and Inspections Required After a Collision 
  3. Clear DTCs - Use a scan tool.
  4. Verify DTC B1A34 is not set.
    • If the DTC B1A34 is set. 

      Replace the component:K36 Restraints Control Module

    • Go to next step: If the DTC is not set 
  5. All OK.
scientia non olet · About Mike's Workshop Manuals