Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2021 >> Traverse L >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Vehicle Access System >> Diagnostic Information and Procedures >> Exterior Door Handle Switch Malfunction >> Component Testing

Component Testing

  1. Ignition/Vehicle - Off
  2. Disconnect the appropriate electrical connector: A24 Door Handle Assembly
  3. Test for infinite resistance between the test points: Signal terminal 1 & Ground terminal 5 - Not Pressed
    • If less than infinite resistance 

      Replace the component: A24 Door Handle Assembly

    • Go to next step: If infinite resistance 
  4. Test for less than 3 ohms between the test points: Signal terminal 1 & Ground terminal 5 - Pressed
    • If 3 ohms or greater 

      Replace the component: A24 Door Handle Assembly

    • Go to next step: If less than 3 ohms 
  5. All OK.
scientia non olet · About Mike's Workshop Manuals