Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

NOTE:
Position the fork of the brake pedal position sensor over the brake pedal arm pin.

Brake Pedal Position Sensor (1) - Install
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Fastener Caution

Brake Pedal Position Sensor Bolt (1) - Install and tighten 2.5 N.m (22 lb in)
Brake Pedal Position Sensor Electrical Connector - Connect
Floor Front Air Outlet Duct - Install - Floor Front Air Outlet Duct Replacement - Left Side
Calibrate the brake pedal position sensor. Brake Pedal Position Sensor Calibration