Installation Procedure
WARNING: This page is about a different car, the 2021 GMC Sierra 1500. However, it is still accessible from the selected car via links, so may be relevant.
Remote Function Actuator Module (1) - Install
- Secure the retaining tabs.
- Connect the electrical connector.
Route the seat belt webbing through the right side body lock pillar garnish molding (1).
- Body Side Rear Window Garnish Molding-Right Side (1) - Install
- Quarter Window Trim Finish Panel Bolt-Right Side (2) - Install and tighten - Fastener Specifications
Reposition the right side rear seat belt retractor anchor plate (2) back under the rear floor panel carpet.
- Rear Seat Belt Retractor Anchor Plate Bolt-Right Side (1) - Install and tighten - Fastener Specifications
- Enable the SIR System. SIR Disabling and Enabling
CAUTION:
Refer to Fastener Caution .