Pinpoint Test N : The SODL (Side Obstacle Detection Control Module LH) Does Not Respond To The Diagnostic Scan Tool: Notes
WARNING: This page is about a different car, the 2021 Ford EcoSport. However, it is still accessible from the selected car via links, so may be relevant.
Refer to MODULE COMMUNICATIONS NETWORK for schematic and connector information.
Normal Operation and Fault Conditions
The SODL communicates on the MS-CAN, and with the diagnostic scan tool through the HS-CAN2. Diagnostic messages are sent/received through the HS-CAN2 circuits at the DLC, and translated through the GWM to the MS-CAN.
Possible Sources
- Fuse
- Wiring, terminals and connectors
- SODL
Visual Inspection and Pre-checks
- Verify BJB fuse 58 (10A) is OK.