Pinpoint Test M : The SCCM (Steering Column Control Module) Does Not Respond To The Diagnostic Scan Tool: Notes
WARNING: This page is about a different car, the 2021 Ford EcoSport. However, it is still accessible from the selected car via links, so may be relevant.
Refer to MODULE COMMUNICATIONS NETWORK for schematic and connector information.
Normal Operation and Fault Conditions
The SCCM communicates on the HS-CAN2.
Possible Sources
- Fuse
- Wiring, terminals and connectors
- SCCM
Visual Inspection and Pre-checks
- Verify BCM fuse 22 (7.5A) is OK.