Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2021 >> Express 2500 Base, Van Cargo Extended, 2.8L Eng VIN 1 >> Repair and Diagnosis >> External Pages >> Different car >> Section 114 (Shift Lock Control System) >> Repair Instructions >> Automatic Transmission Shift Lock Control Actuator Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2022 GMC Savana 3500, 2022 GMC Savana 2500, 2022 Chevrolet Express 3500, and 2022 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM324906Courtesy of GENERAL MOTORS COMPANY
    WARNING:

    Refer to SIR Warning .

    Disable the SIR system. Refer to SIR Disabling and Enabling .

  2. Put the shift lever clevis into the neutral position.
  3. Remove the knee bolster bracket. Refer to Instrument Panel Knee Bolster Bracket Replacement (Left Side)Instrument Panel Knee Bolster Bracket Replacement (Right Side) .
  4. Disconnect the electrical connector.
  5. Use a small screwdriver to pry the A/T shift lock control actuator away from the steering column jacket assembly and the cable shift cam assembly.
  6. Remove the A/T shift lock control actuator.
scientia non olet · About Mike's Workshop Manuals