Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2021 >> Camaro LS, Standard Trans >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Driver Assistance Systems >> Diagnostic Information and Procedures >> DTC B101D >> Circuit/System Verification

Circuit/System Verification

  1. Ignition ON.
  2. Verify the DTC B101D is not set.
    • If the DTC is set 
    1. Replace the B218L Side Object Sensor Module - Left.
    2. Verify no new DTCs set and the side blind zone alert operates properly.
      • Go to next step: If there are no new DTCs and the side object system operates properly
    3. All OK.
    • Go to next step: If the DTC is not set 
  3. All OK
scientia non olet · About Mike's Workshop Manuals