Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2021 >> Camaro LS, Automatic Trans >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Repair Instructions >> Brake Pressure Modulator Valve Pump Mounting Bracket Replacement >> Removal Procedure

Removal Procedure

CAUTION:

Always connect or disconnect the wiring harness connector from the EBCM/EBTCM with the ignition switch in the OFF position. Failure to observe this precaution could result in damage to the EBCM/EBTCM.

  1. Place the ignition switch in the OFF position.
  2. Disconnect the electronic brake control module (EBCM) electrical connector.
  3. Electronic Brake Control Module with Brake Pressure Modulator Valve Replacement  - Remove
  4. GM4168097Courtesy of GENERAL MOTORS COMPANY

    Brake Pressure Modulator Valve Nut (1) - Remove [2x]

  5. GM4168104Courtesy of GENERAL MOTORS COMPANY

    Brake Pressure Modulator Valve Bracket Washer (1) - Remove [2x]

  6. GM4168107Courtesy of GENERAL MOTORS COMPANY

    Brake Pressure Modulator Valve Bracket (1) - Remove

scientia non olet · About Mike's Workshop Manuals