Installation Procedure
Battery (1) - Install
- CAUTION:
Refer to Fastener Caution .
Battery Retainer Assembly (2) - Install
- Battery Retainer Assembly Bolt (1) - Install and tighten 8 N.m (71 lb/in)
Battery Tray Support (2) - Install
- Battery Tray Support Nut (1) - Install and tighten 9 N.m (80 lb/in)
Battery Positive Cable (3) @ Battery Post - Install
- Battery Positive Cable Clamp Fastener - Install and tighten 5 N.m (44 lb/in)
- Battery Positive Cable Protective Cover (1) - Install
- Connect the battery negative cable. Battery Negative Cable Disconnection and Connection .