Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2020 >> Traverse L >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Power Transfer Unit - GKN 761 >> Repair Instructions - On Vehicle >> Fill Plug Replacement >> Installation Procedure

Installation Procedure

  1. Fill the transfer case to the bottom of the fill plug hole with the recommended fluid. Adhesives, Fluids, Lubricants, and Sealers , and Approximate Fluid Capacities .
  2. Fig 1: Identifying Oil Drain Plug And Fill Plug
    GM4288856Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Component Fastener Tightening Caution .

    Install a NEW fill plug (1) and seal and tighten to 39 N.m (29 lb ft).

  3. Lower the vehicle.
scientia non olet · About Mike's Workshop Manuals