Installation Procedure
Generator (3) - Install
- Generator Mounting Bolt (1) - Install and Tighten [2x] 58 N.m (43 lb ft)
- Retainer (2) - Engage
- Install the drive belt. Drive Belt Replacement
- Install the air cleaner assembly. Air Cleaner Assembly Replacement
Battery Positive Cable (2) - Install
- Battery Positive Cable Nut (3) - Install and Tighten 15 N.m (11 lb ft)
- Generator Terminal Boot (4) - Install
- Electrical Connector (1) - Connect
- Install the engine cover. Engine Cover Replacement
- Install the driver seat. Front Seat Removal and Installation
- Connect the negative battery cable. Battery Negative Cable Disconnection and Connection (Single Battery) , or Battery Negative Cable Disconnection and Connection (Dual Battery)
CAUTION:
Refer to Fastener Caution