Fastener Specifications (On Vehicle)
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Auxiliary Transmission Oil Cooler Quick Connect Fittings | 25 N.m (18 lb ft) |
| Auxiliary Transmission Oil Cooler Brace to Skid Bar Bolt | 25 N.m (18 lb ft) |
| Auxiliary Transmission Oil Cooler Bracket to Body Nuts | 8 N.m (71 lb in) |
| Auxiliary Transmission Oil Cooler to Bracket Mounting Bolts | 22 N.m (16 lb ft) |
| Shift Control Assembly Console Bolts | 9 N.m (80 lb in) |
| Shift Control Knob Screw | 2 N.m (18 lb in) |
| Shift Control Linkage to Manual Shift Shaft Nut (AWD) | 20 N.m (15 lb ft) |
| Shift Control Linkage to Manual Shift Shaft Nut (RWD) | 15 N.m (11 lb ft) |
| Torque Converter to Flywheel Bolts | 63 N.m (46 lb ft) |
| Transmission Mount Bolts - 2WD | 100 N.m (74 lb ft) |
| Transmission Mount Bolts - 4WD | 72 N.m (53 lb ft) |
| Transmission Oil Cooler Pipe Clip to Oil Pan Nuts | 10 N.m (89 lb in) |
| Transmission Oil Cooler Pipe Clip to Torque Tube Bolts | 12 N.m (106 lb in) |
| Transmission Oil Cooler Pipes to Transmission Bolt | 16 N.m (12 lb ft) |
| Transmission to Engine Block Bolts | 50 N.m (37 lb ft) |
| Transmission Support Assembly to Body Bolts | 60 N.m (44 lb ft) |
| Transmission Support Assembly to Transmission Bolts - RWD | 60 N.m (44 lb ft) |
| Transmission Support Assembly to Transmission Bolts - AWD | 110 N.m (81 lb ft) |