Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2019 >> Trax LS, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 90 (Antilock Brake System) >> Repair Instructions >> Brake Pressure Modulator Valve Bracket Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2018 Chevrolet Trax and 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the BPMV bracket to the BPMV.
  2. GM2535379
    CAUTION:

    Refer to Fastener Caution .

    Install the BPMV bolts (1) and tighten to 11 N.m (97 lb in).

  3. Install the BPMV and bracket assembly. Refer to Brake Pressure Modulator Valve Replacement .
scientia non olet · About Mike's Workshop Manuals