Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2019 >> Trax LS, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 112 (Front Suspension System) >> Repair Instructions >> Front Lower Control Arm Ball Stud Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2018 Chevrolet Trax and 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM4769274

    Front Lower Control Arm Ball Stud(1)@Front Lower Control Arm(2) - Install

  2. GM4769289

    Front Lower Control Arm Ball Stud Bolt(1) - Install

    3. CAUTION:

    Refer to Fastener Caution .

  3. Front Lower Control Arm Ball Stud Nut(2) - Install and tighten[3x]35 N.m (26 lb ft)
  4. Lower Control Arm - Install - Lower Control Arm Replacement 
scientia non olet · About Mike's Workshop Manuals