Installation Procedure
WARNING: This page is about a different car, the 2018 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
Align the crank arm and transmission link rod so that crank arm (1) and link rod (2) are in straight line.
- Use a wiper linkage installer or similar tool, install the transmission link rod onto the wiper motor crank arm stud.
Install the windshield wiper motor bolt (1) and tighten bolt to 9 N.m (80 lb in).
- Install the windshield system module nut (2) and tighten nut to 19 N.m (14 lb ft).
- Windshield Wiper Transmission Replacement - - Install
- Air Inlet Grille Panel Replacement - - Install
- Windshield Wiper Arm Replacement - - Install
- Inspect the windshield wiper operation.