Theft Deterrent Module Replacement (With BTM)

WARNING: This page is about a different car, the 2018 Chevrolet Sonic. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Front Floor Console Cup Holder Replacement
1	Theft Deterrent Module Bolt/Screw (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 1.1 N.m (10 lb in)
2	Theft Deterrent Module Procedure Disconnect the electrical connector. Refer to Control Module References for programming and set up procedures.

Callout

Component Name

Preliminary Procedure
Front Floor Console Cup Holder Replacement

Theft Deterrent Module Bolt/Screw (Qty: 2)

CAUTION:

Refer to Fastener Caution .

Tighten
1.1 N.m (10 lb in)

Theft Deterrent Module

Procedure

Disconnect the electrical connector.
Refer to Control Module References for programming and set up procedures.