Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2019 >> Sonic LS, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 44 (Lighting System) >> Repair Instructions >> Brake Pedal Position Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2018 Chevrolet Sonic. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel lower trim pad cover. Refer to Instrument Panel Lower Trim Pad Cover Replacement .
  2. GM2511817Courtesy of GENERAL MOTORS COMPANY

    Disconnect the brake pedal position sensor electrical connector.

  3. Remove the brake pedal position sensor bolt (1).
  4. Remove the brake pedal position sensor.
scientia non olet · About Mike's Workshop Manuals