Installation Procedure
Install the generator. (1)
- CAUTION:
Refer to Fastener Caution .
Generator Fastener (1) - Install and tighten [2X] 22 N.m (16 lb ft)
Generator Bolt (2) - Install and tighten 22 N.m (16 lb ft)
Battery Positive Cable (3) - Install
- Generator Nut (2) - Install and tighten 15 N.m (11 lb ft)
- Connect the electrical connector. (4)
- Protective Cap (1) - Install
- Install the drive belt. Drive Belt Replacement
- Install the air cleaner outlet duct. Air Cleaner Outlet Duct Replacement
- Install the air cleaner assembly. Air Cleaner Assembly Replacement
- Connect the negative battery cable. Battery Negative Cable Disconnection and Connection