Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2019 >> Camaro SS, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 128 (Secondary And Configurable Customer Control System) >> Diagnostic Information and Procedures >> Drive Mode Switch Malfunction >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2018 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition - On / Vehicle - In Service Mode
  2. Press and release the switch: Drive Mode Select Switch - Up & Down

    Verify the following information is correctly displayed: Drive Mode@A5 Driver Information Center

    • If the component does not work as specified 

      Refer to: Circuit/System Testing

    • Go to next step: If the component works as specified 
  3. All OK.
scientia non olet · About Mike's Workshop Manuals