Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2018 >> Volt Premier >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel System- - 1.5L (L3A) - Repair Instructions >> Repair Instructions >> Fuel Tank Filler Pipe Replacement >> Removal Procedure

Removal Procedure

  1. Battery Negative Cable Disconnection and Connection - Disconnect
  2. Drain the fuel tank. Fuel Tank Draining 
  3. Fuel Tank Filler Pipe Housing Replacement - Remove
  4. GM4091059Courtesy of GENERAL MOTORS COMPANY

    Fuel Tank Filler Pipe Bolt (1) - Remove

  5. Raise and support the vehicle. Lifting and Jacking the Vehicle
  6. Rear Wheelhouse Liner Replacement - Remove-Right Side
  7. GM4091061Courtesy of GENERAL MOTORS COMPANY

    Fuel Tank Filler Pipe Ground Bolt (1) - Remove

  8. Wiring Harness Clip (2) - Remove
  9. GM4091060Courtesy of GENERAL MOTORS COMPANY

    Disconnect the evaporative emission system vacuum leak pump filter pipe (6). Refer to Plastic Collar Quick Connect Fitting Service .

  10. Close all open connections with the EN-6015  plugs.
  11. Disconnect the fuel tank vent pipe (3). Refer to Plastic Collar Quick Connect Fitting Service .
  12. Close all open connections with the EN-6015  plugs.
  13. Loosen the clamp. (4)
  14. Retainer (1) - Remove
  15. GM4091062Courtesy of GENERAL MOTORS COMPANY

    Fuel Tank Filler Pipe (1) - Remove