Circuit/System Verification
- Ignition - On/Vehicle - In Service Mode
- S79D Window Switch - Driver - Not Used
Verify the scan tool parameter:
- Driver Window Main Control Down Switch = Inactive
- Driver Window Main Control Up Switch = Inactive
- Driver Window Main Control Express Switch = Inactive
- If not the specified state
Refer to: Circuit/System Testing
- Go to next step: If the specified state
- Operate the component: S79D Window Switch - Driver - Pressed & Pulled
Verify the scan tool parameter:
- Driver Window Main Control Down Switch = Active
- Driver Window Main Control Up Switch = Active
- Driver Window Main Control Express Switch = Active
- If not the specified state
Refer to: Circuit/System Testing
- Go to next step: If the specified state
- All OK.