Installation Procedure

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.

Install the battery (1) into the battery tray.

Fig 1: Battery Bracket Bolt And Battery Bracket
Courtesy of GENERAL MOTORS COMPANY
Install the battery bracket (3) and tighten the battery bracket bolt (2) to 9 N.m (80 lb in).
CAUTION: Refer to Fastener Caution .
Install the battery positive cable (2) to the battery and tighten the battery positive cable junction block post nut (1) to 6 N.m (53 lb in).

Fig 2: Battery Positive Cable Junction Block Post Nut
Courtesy of GENERAL MOTORS COMPANY
Install the battery positive cable junction block cover (1).

Fig 3: Battery Positive Cable Junction Block Cover
Courtesy of GENERAL MOTORS COMPANY
Connect battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .