Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2018 >> Sonic Premier, 4D Hatchback, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Disc Brake System) >> Repair Instructions >> Rear Brake Caliper Bracket Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2018 GMC Canyon and 2018 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:

Refer to Brake Dust Warning .

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
  3. Remove the rear disc brake pads. Refer to Rear Disc Brake Pads Replacement .
  4. GM3686444Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Do not reuse the brake caliper bracket bolts.

    Remove and discard the brake caliper bracket bolts (1).

  5. GM3686446Courtesy of GENERAL MOTORS COMPANY

    Remove the rear brake caliper bracket (1).

scientia non olet · About Mike's Workshop Manuals