Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2018 >> Sonic Premier, 4D Hatchback, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 177 (Power Steering System) >> Diagnostic Information and Procedures >> DTC C056D (Power Steering Control Module) >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2018 GMC Canyon and 2018 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON.
  2. Verify DTC C056D is not set.
    • If DTC C056D is set 
      NOTE:

      Check for faulty connections or corrosion at the K43 Power Steering Control Module harness and engine wiring harness before replacing the K43 Power Steering Control Module.

      Replace the K43 Power Steering Control Module.

    • Go to next step: If DTC C056D is not set 
  3. All OK
scientia non olet · About Mike's Workshop Manuals