Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2018 >> Express 3500 Base, Van Cargo Extended, 6.0L Eng VIN G >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 6.0L (L96 LC8) - Repair Instructions >> Repair Instructions >> Manifold Absolute Pressure Sensor Replacement >> Installation Procedure

Installation Procedure

  1. GM4856810Courtesy of GENERAL MOTORS COMPANY

    Lubricate the manifold absolute pressure seal (1) with clean engine oil. Adhesives, Fluids, Lubricants, and Sealers

  2. GM4856801Courtesy of GENERAL MOTORS COMPANY

    Install the manifold absolute pressure sensor (2).

  3. Install the manifold absolute pressure sensor retainer (1).
  4. GM4856800Courtesy of GENERAL MOTORS COMPANY

    Connect the electrical connector (1).

  5. Engine Cover - Install - Engine Cover Replacement
  6. Connect the battery negative cable. Battery Negative Cable Disconnection and Connection (Single Battery)Battery Negative Cable Disconnection and Connection (Dual Battery)
scientia non olet · About Mike's Workshop Manuals