Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2018 >> Express 3500 Base, Van Cargo Extended, 6.0L Eng VIN G >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 6.0L (L96 LC8) - Repair Instructions >> Repair Instructions >> Fuel Pump Flow Control Module Replacement >> Installation Procedure

Installation Procedure

  1. GM1931045Courtesy of GENERAL MOTORS COMPANY

    Place the fuel pump flow control module (2) against the frame.

    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the fuel pump flow control module bolts (1) and tighten to 9 N.m (80 lb in).
  3. GM1931044Courtesy of GENERAL MOTORS COMPANY

    Connect the chassis wiring harness electrical connector (1) to the fuel pump flow control module (2).

  4. Lower the vehicle.
  5. Program the fuel pump flow control module. Refer to Control Module References .
scientia non olet · About Mike's Workshop Manuals