Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2018 >> Express 2500 Base, Van Cargo Extended, 2.8L Eng VIN 1 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 2.8L (LWN) Diesel - Repair Instructions >> Repair Instructions >> Nitrogen Oxides Sensor Replacement - Position 2 >> Removal Procedure

Removal Procedure

  1. Raise and support the vehicle. Lifting and Jacking the Vehicle
  2. GM4625437Courtesy of GENERAL MOTORS COMPANY

    Electrical Connector (1) @ Nitrogen Oxides Sensor (3) - Disconnect

  3. Nitrogen Oxides Sensor Bolt (2) - Remove [2x]
  4. GM4625439Courtesy of GENERAL MOTORS COMPANY

    Nitrogen Oxides Sensor Cable (1) @ Nitrogen Oxides Sensor Cable Clip (2) - Unclip

  5. GM4625440Courtesy of GENERAL MOTORS COMPANY

    Nitrogen Oxides Sensor (1) - Remove

scientia non olet · About Mike's Workshop Manuals