Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2018 >> Express 2500 Base, Van Cargo Extended, 2.8L Eng VIN 1 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 2.8L (LWN) Diesel - Repair Instructions >> Repair Instructions >> Exhaust Temperature Sensor Replacement - Position 1

Exhaust Temperature Sensor Replacement - Position 1

GM4627681Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
Preliminary Procedure 
Engine Cover Replacement
1 Exhaust Temperature Sensor
CAUTION:

Refer to Component Fastener Tightening Caution .

Procedure

  1. Disconnect the electrical connector.
  2. Release the retainers from the bracket.
  3. If reinstalling the old sensor, coat the threads with anti-sieze compound. Adhesives, Fluids, Lubricants, and Sealers .
  4. If replacing, perform the exhaust gas temperature sensor reset. Exhaust Gas Temperature Sensor Reset 
  5. If replacing, perform the NOx catalyst reductant loading reset. NOx Catalyst Reductant Loading Reset 
NOTE:

Apply penetrating oil to the sensor and allow to soak for 10 minutes prior to removal.


Tighten 
45 N.m (33 lb ft)
scientia non olet · About Mike's Workshop Manuals