Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2018 >> Express 2500 Base, Van Cargo Extended, 2.8L Eng VIN 1 >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Repair Instructions >> Front Wheel Speed Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING:

Refer to Brake Dust Warning .

  1. Raise and support the vehicle. Lifting and Jacking the Vehicle
  2. Remove the tire and wheel assembly. Tire and Wheel Removal and Installation (Without Dual Rear Wheels)Tire and Wheel Removal and Installation (With Dual Rear Wheels)
  3. GM4829375Courtesy of GENERAL MOTORS COMPANY

    Front Brake Rotor (1) - Remove - Front Brake Rotor Replacement (JH6)Front Brake Rotor Replacement (JH9)

  4. GM4828444Courtesy of GENERAL MOTORS COMPANY

    Electrical Connector (1) - Disconnect

  5. GM4828447Courtesy of GENERAL MOTORS COMPANY

    Clip (1) - Release

  6. GM4828448Courtesy of GENERAL MOTORS COMPANY

    Clip (1) - Release

  7. GM4828449Courtesy of GENERAL MOTORS COMPANY

    Clip (1) - Release

  8. GM4828451Courtesy of GENERAL MOTORS COMPANY

    Wheel Speed Sensor Bolt (1) - Remove

  9. GM4828452Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Carefully remove the sensor by pulling it straight out of the bore. DO NOT use a screwdriver, or other device. Prying will cause the sensor body to break off in the bore.

    Wheel Speed Sensor (1) - Remove

scientia non olet · About Mike's Workshop Manuals