Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2018 >> Cruze LS, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 1.4L (LE2) - Repair Instructions >> Repair Instructions >> Evaporative Emission Front Pipe Replacement >> Installation Procedure

Installation Procedure

  1. Evaporative Emission Front Pipe@Vehicle - Install
  2. GM3707253

    Remove the EN-6015  plugs from all connections.

  3. Evaporative Emission Front Pipe(2)@Evaporative Emission Canister Purge Pipe(1) - Connect - Plastic Collar Quick Connect Fitting Service 
  4. GM3707252

    Evaporative Emission Front Pipe(1)@Retainer Clip(2) - Install[4x]

  5. Retainer Clip(2) - Close[4x]
  6. GM3707251

    Evaporative Emission Front Pipe(2)@Bulkhead Clip(1) - Install

  7. Bulkhead Clip(1) - Close
  8. GM4328654

    Evaporative Emission Front Pipe(1)@Bulkhead Clip(2) - Install

  9. Bulkhead Clip(2) - Close
  10. Lower the vehicle.
  11. GM4328653

    Evaporative Emission Front Pipe(2)@Bulkhead Clip(1) - Install

  12. Bulkhead Clip(1) - Close
  13. Remove the EN-6015  plugs from all connections.
  14. Evaporative Emission Front Pipe(2)@Evaporative Emission Canister Purge Solenoid Valve - Connect - Plastic Collar Quick Connect Fitting Service 
  15. Drivetrain and Front Suspension Cradle - Install - Drivetrain and Front Suspension Cradle Replacement
  16. Install the engine sight shield. Engine Sight Shield Replacement
scientia non olet · About Mike's Workshop Manuals