Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2018 >> Corvette Stingray, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 6.2L (LT1 LT4) - Repair Instructions >> Repair Instructions >> Fuel Sender Assembly Replacement >> Removal Procedure

Removal Procedure

  1. Remove the right fuel tank. Refer to Fuel Tank Replacement - Right Side .
  2. GM3415301
    NOTE:

    The fuel sender is spring loaded and will spring upward when the locking ring is removed.

    Using the CH-48482  lock ring tool, turn the fuel sender locking ring (1) counterclockwise and remove lock ring.

  3. GM3415300

    Lift the fuel sender (1) carefully to disconnect the lines from the fuel sender (1) inside the tank.

  4. Remove the fuel sender (1) from the tank.
scientia non olet · About Mike's Workshop Manuals