Fastener Specifications
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Air Conditioning System Sealing Washer |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Air Conditioning Compressor Stud (LGX) | 9 N.m (80 lb in) |
| Air Conditioning Compressor Bolt | 22 N.m (16 lb ft) |
| Air Conditioning Compressor Bracket (LT1, LT4) | 22 N.m (16 lb ft) |
| Air Conditioning Compressor Hose Bolt | 22 N.m (16 lb ft) |
| Air Conditioning Compressor Hose Nut | 22 N.m (16 lb ft) |
| Air Conditioning Compressor Nut | 22 N.m (16 lb ft) |
| Air Conditioning Compressor Pulley Bolt | 12 N.m (106 lb in) |
| Air Conditioning Compressor Stud (LT1, LT4, LTG) | 8 N.m (71 lb in) |
| Air Conditioning Condenser Brace Bolt (LGX without V18) | 10 N.m (89 lb in) |
| Air Conditioning Condenser Brace Bolt (LGX, LT1 with V18) | 9 N.m (80 lb in) |
| Air Conditioning Condenser Brace Bolt (LTG, LT4) | 9 N.m (80 lb in) |
| Air Conditioning Condenser Hose Nut | 22 N.m (16 lb ft) |
| Air Conditioning Condenser Tube Bolt | 9 N.m (80 lb in) |
| Air Conditioning Condenser Tube Nut | 22 N.m (16 lb ft) |
| Air Conditioning Evaporator Case Assembly Fastener | 1 N.m (9 lb in) |
| Air Conditioning Evaporator Hose Clip Nut | 9 N.m (80 lb in) |
| Air Conditioning Evaporator Thermal Expansion Valve Bolt | 6 N.m (53 lb in) |
| Air Conditioning Evaporator Thermal Expansion Valve Hose Nut | 22 N.m (16 lb ft) |
| Air Conditioning Evaporator Tube Cover Fastener | 1 N.m (9 lb in) |
| Air Conditioning Receiver and Dehydrator Plug | 12 N.m (106 lb in) |
| Air Conditioning Refrigerant High Pressure Service Valve | 2 N.m (18 lb in) |
| Air Conditioning Refrigerant Pressure Sensor | 7 N.m (62 lb in) |
| Air Distributor Duct Adapter Bolt | 1.5 N.m (13 lb in) |
| Air Distributor Front Duct Bolt | 1.5 N.m (13 lb in) |
| Air Inlet Housing Bolt | 3.3 N.m (29 lb in) |
| Blower Case Assembly Fastener (Lower) | 1 N.m (9 lb in) |
| Blower Case Assembly Fastener at the Evaporator Case Assembly | 3.3 N.m (29 lb in) |
| Blower Motor Bolt | 2.5 N.m (22 lb in) |
| Floor Front Air Outlet Duct Bolt | 2.5 N.m (22 lb in) |
| Floor Panel Tunnel Panel Outer Insulator Nut | 9 N.m (80 lb in) |
| Heater and Air Conditioning Evaporator and Blower Module Bolt | 9 N.m (80 lb in) |
| Heater Core Tube Bracket Fastener | 1.5 N.m (13 lb in) |
| Instrument Panel Center Air Outlet Duct Bolt | 2.5 N.m (22 lb in) |
| Instrument Panel Outer Air Outlet Duct Bolt | 2.5 N.m (22 lb in) |
| Side Window Defogger Outlet Duct Bolt | 2.5 N.m (22 lb in) |