Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2017 >> Volt Premier >> Repair and Diagnosis >> Hybrid/Electric Powertrain >> Cooling Systems >> Hybrid/EV System Heating And Cooling >> Repair Instructions >> Coolant Temperature Sensor Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Electrical Connector And Coolant Temperature Sensor
    GM4091237Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Component Fastener Tightening Caution .

  1. Install the coolant temperature sensor (2) and tighten to 33 N.m (24 lb ft).
  2. Connect Electrical Connector (1)
  3. Install Front Bumper Fascia Center Support Replacement
  4. Install Pedestrian Sound Alert Speaker Replacement
  5. Fill the cooling system. Drive Motor Generator Power Inverter Module Cooling System Draining and Filling 
scientia non olet · About Mike's Workshop Manuals