Removal Procedure

WARNING:

Always perform the High Voltage Disabling procedure prior to servicing any High Voltage component or connection. Personal Protection Equipment (PPE) and proper procedures must be followed.

The High Voltage Disabling procedure will perform the following tasks:

Identify how to disable high voltage.
Identify how to test for the presence of high voltage.
Identify condition under which high voltage is always present and personal protection equipment (PPE) and proper procedures must be followed.

Failure to follow the procedures exactly as written may result in serious injury or death.

Disable the high voltage system. High Voltage Disabling
Remove Rear Compartment Floor Stowage Trim Compartment Rear Compartment Floor Stowage Trim Compartment Replacement
Disconnect Battery Negative Cable Battery Negative Cable Disconnection and Connection

Fig 1: Panel Trim And Nuts

Courtesy of GENERAL MOTORS COMPANY

Remove the 3 panel trim nuts (1).
Remove the panel trim (2).

Fig 2: Battery Fuse Block Cover And Retaining Tabs

Courtesy of GENERAL MOTORS COMPANY

Release the retaining tabs.(1)
Remove Battery Fuse Block Cover(2)

Fig 3: Battery Positive Cable And Nut

Courtesy of GENERAL MOTORS COMPANY

Remove Battery Positive Cable Nut (4) @Battery Distribution Fuse Block (5)
Remove Battery Positive Cable Nut (1) @Accessory DC Power Control Module (2)
Disengage Retainer (3)

Fig 4: Battery Negative Cable Ground Fastener

Courtesy of GENERAL MOTORS COMPANY

Remove Battery Negative Cable Ground Fastener (1) @Battery Tray (3)
Remove Battery Positive and Negative Cable (2)