Installation Procedure
- Install Serial Data Gateway Bracket (1)
- Install Serial Data Gateway Module Bracket Bolt (1) and tighten 1.8 N.m (16 lb in)
- Install Serial Data Gateway Module Bracket Bolt (1) and tighten 1.8 N.m (16 lb in)
- Install Serial Data Gateway Module (1)
- Connect the electrical connector.
- Install Instrument Panel Lower Airbag Bracket (1)
- Install Instrument Panel Lower Airbag Bracket Bolt (1) and tighten 9 N.m (80 lb in)
- Connect the electrical connector.
- Install Instrument Panel Bolt (1) and tighten 2.5 N.m (22 lb in)
- Install Instrument Panel Lower Trim Panel Insulator (2) - Instrument Panel Lower Trim Panel Insulator Replacement (Buick)
- Install Instrument Panel Outer Trim Cover - Right (2) - Instrument Panel Outer Trim Cover Replacement (Buick)
- Install Instrument Panel Compartment (2) -Instrument Panel Compartment Replacement
- Enable the SIR System. SIR Disabling and Enabling
CAUTION: