Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2017 >> Spark LS, Standard Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 1.4L (LV7) - Repair Instructions >> Repair Instructions >> Engine Oil Pressure Sensor Replacement (L5Q) >> Removal Procedure

Removal Procedure

  1. Remove the engine control module. Refer to the Engine Control Module Replacement .
  2. Disconnect the 2 engine master harness wiring harness retainer (1) and evaporative emission canister purge solenoid valve hose.
    Fig 1: Engine Master Harness Wiring Harness Retainers
    GM4035055Courtesy of GENERAL MOTORS COMPANY
  3. Remove the transmission mount bracket bolt (1) and transmission mount bracket (2).
    Fig 2: Transmission Mount Bracket Bolt
    GM4035060Courtesy of GENERAL MOTORS COMPANY
  4. Disconnect the engine oil pressure sensor connector (1).
    Fig 3: Engine Oil Pressure Sensor Connector
    GM4035063Courtesy of GENERAL MOTORS COMPANY
  5. Remove the engine oil pressure sensor (2).
scientia non olet · About Mike's Workshop Manuals