Fastener Specifications
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Transmission Fluid Cooler Pipe Fitting Retaining Clip |
| Transmission Fluid Cooler Pipe Fitting Seal |
| Transmission Fluid Cooler Pipe O-ring Seal |
| Transmission Fluid Cooler Thermal Bypass valve Gasket |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Transmission Fluid Auxiliary Cooler Fastener(LC8, L96 with MYD) | 8 (71 lb in) |
| Transmission Fluid Auxiliary Cooler Fastener(L5P with MW7) | 9 (80 lb in) |
| Transmission Fluid Cooler Pipe Bolt | 22 (16 lb ft) |
| Transmission Fluid Cooler Pipe Connector@Auxiliary Cooler | 20 (15 lb ft) |
| Transmission Fluid Cooler Pipe Connector Bolt | 22 (16 lb ft) |
| Transmission Fluid Cooler Thermal Bypass Valve Bolt | 22 (16 lb ft) |
| Transmission Oil Cooler Fitting @Radiator | 24 (18 lb ft) |