Circuit/System Verification
- Ignition ON.
- Verify that no DTCs are set, except DTC P061C.
- If any other DTC is set, except DTC P061C
Refer to Diagnostic Trouble Code (DTC) List - Vehicle .
- If only DTC P061C is set
- If any other DTC is set, except DTC P061C
- Replace the K44 Power Take-Off Control Module.
- Verify DTC P061C does not set when operating the vehicle within the conditions for running the DTC.
- If the DTC sets
Replace the K20 Engine Control Module.
- If the DTC does not set
- If the DTC sets
- All OK.