Conditions for Running the DTC

P0A87

• DTC P0A88 or P0A89 is not set.
• The high voltage contactors are all open for 0.625 s and then transition to precharge mode.

P0A88

• The ignition is ON.
• 14V power module is commanded ON.
• The run/crank voltage is greater than 9 V.
• The hood is closed.
• The 14 V power module setpoint target voltage is 13 V or greater; OR less than 13 V for 1 hour.

P0A89

• The ignition is ON.
• 14 V power module is commanded ON.
• The run/crank voltage is greater than 9 V.