Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2017 >> SS Automatic Trans >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Diagnostic Information And Procedures >> Diagnostic Information and Procedures >> Vehicle Will Not Change Power Mode >> Circuit/System Verification

Circuit/System Verification

  1. Verify DTC B097B 61 is not set.
    • If DTC B097B 61 is set 

      Test or replace the S38 Ignition Mode Switch.

    • If DTC B097B 61 is not set 
  2. Verify the green LED illuminates when the S38 Ignition Mode Switch is pressed and held for up to 10 s, with the brake pedal released.
    • If the green LED does not illuminate 

      Refer to Circuit/System Testing

    • If the green LED illuminates 
  3. All OK.
scientia non olet · About Mike's Workshop Manuals