Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2017 >> Malibu LS >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 1.5L (LFV) - Repair Instructions >> Repair Instructions >> Fuel Injection Fuel Rail Fuel Pressure Sensor Replacement >> Removal Procedure

Removal Procedure

  1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief
  2. Intake Manifold Cover - Remove Intake Manifold Cover Replacement
  3. Disconnect the electrical connector (1).
    Fig 1: Fuel Injection Fuel Rail Fuel Pressure Sensor Electrical Connector
    GM4180364Courtesy of GENERAL MOTORS COMPANY
  4. Remove and DISCARD the fuel injection fuel rail fuel pressure sensor (2).
    CAUTION: Refer to Fuel and Evaporative Emission Hose/Pipe Connection Cleaning Caution .
    NOTE:
    • Do NOT apply force to the plastic housing of the fuel injection fuel rail fuel pressure sensor. ONLY apply force to the attached hexagon.
    • Some fuel may leak from the fuel injection fuel rail orifice after the sensor is removed. Dry the area around the orifice using a lint free cloth.
    • After removal, the area around the fuel injection fuel rail sealing surface should be inspected. The surface should be free of fuel, dirt, debris and burrs.
scientia non olet · About Mike's Workshop Manuals