Installation Procedure

Apply structural adhesive epoxy, (1) Lord Fusor™ 127EZ or equivalent, to fascia at mating surface according to manufacturer's directions.

Fig 1: Structural Adhesive Epoxy
Courtesy of GENERAL MOTORS COMPANY
Using the alignment tabs/outline, install the sensor bracket (1) to the fascia.

Fig 2: Front Parking Assist Alarm Sensor Bracket
Courtesy of GENERAL MOTORS COMPANY
Allow adhesive to cure according to manufacturer's directions.
Install the sensor (1) to the sensor bracket.

Fig 3: Front Parking Assist Alarm Sensor
Courtesy of GENERAL MOTORS COMPANY
Attach the wiring harness and connect the electrical connectors as necessary.
Front Bumper Fascia - Install Front Bumper Fascia Replacement .