Fuel Pressure Sensor Replacement - Fuel Feed Pipe

Fig 1: Fuel Pressure Sensor - Fuel Feed Pipe (FWD)

GM2756281

Courtesy of GENERAL MOTORS COMPANY

Callout

Component Name

Preliminary Procedures

Relieve the fuel system pressure. Refer to Fuel Pressure Relief (Gasoline) .
Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
Remove the right rear underbody air deflector. Refer to Underbody Rear Air Deflector Replacement - Right Side .

1

Fuel Pressure Sensor

CAUTION:

Refer to Component Fastener Tightening Caution .

Procedure

Disconnect the electrical connector.
Use a NEW O-ring whenever the sensor is removed.

Tighten
15 N.m (11 lb ft)