Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2017 >> Express 2500 Base, Van Cargo, 2.8L Eng VIN 1 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 2.8L (LWN) Diesel - Repair Instructions >> Repair Instructions >> Nitrogen Oxides Sensor Replacement - Position 2 >> Removal Procedure

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle
  2. Disconnect Electrical Connector @ Nitrogen Oxides Sensor
    GM4625437Courtesy of
  3. Remove Nitrogen Oxides Sensor Bolt [2x]
  4. Unclip Nitrogen Oxides Sensor Cable @ Nitrogen Oxides Sensor Cable Clip
    GM4625439Courtesy of
  5. Remove Nitrogen Oxides Sensor
    GM4625440Courtesy of
scientia non olet · About Mike's Workshop Manuals