Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2017 >> Express 2500 Base, Van Cargo Extended, 2.8L Eng VIN 1 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 2.8L (LWN) Diesel - Repair Instructions >> Repair Instructions >> Glow Plug Replacement >> Removal Procedure

Removal Procedure

  1. Fuel Injector Deadener - Refer to Fuel Injector Deadener Replacement 
  2. Remove Auxiliary Heater Inlet and Outlet Hose Clip Nut - [2x]
    GM4639232Courtesy of
  3. Reposition Diesel Fuel Separator
  4. Reposition Exhaust Temperature Sensor Bracket
  5. Disconnect Diesel Glow Plug Wiring Harness [4x]
    GM4639247Courtesy of
    NOTE:

    Long nose pliers may be helpful in disconnecting the glow plug wiring harness from the glow plugs.

  6. Remove the glow plugs (1) from the cylinder head [4x].
    GM4639258Courtesy of
scientia non olet · About Mike's Workshop Manuals