Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2017 >> Cruze LS, Automatic Trans >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Steering Linkage Inner Tie Rod Replacement >> Removal Procedure

Removal Procedure

  1. Remove Steering Gear Boot Replacement 
    2. Fig 1: Steering Linkage Inner Tie Rod And Spacer
    GM4297828Courtesy of GENERAL MOTORS COMPANY
  2. Remove the spacer (2) from the steering linkage inner tie rod (1).
    3. Fig 2: Steering Linkage Inner Tie Rod And Remover
    GM4297829Courtesy of GENERAL MOTORS COMPANY
  3. Install CH-6321  remover (2) @Steering Linkage Inner Tie Rod (1)
  4. Remove Steering Linkage Inner Tie Rod (1)
scientia non olet · About Mike's Workshop Manuals